TD3D Color Lab

MOPA color testing

Test a color.
Build on what works.

Pick a color, burn a 5×5 grid, and mark the squares you like. Smart Test uses your picks to build the next grid for your material and machine.

Try a sample plate

5 × 5 · Brushed 304

Pick a square to see how it changes the next grid.

Illustrative test plate. Columns are speed in mm/s and rows are frequency in kHz.
kHz400450500550600
118
128
138
148
158

Speed in mm/s across the top. Swatches are illustrative.

Next grid center

500 mm/s · 138 kHz

Finer steps of 25 mm/s and 5 kHz

From first plate to next test

  1. Pick a color

    Choose a starting color or reopen a test from your history.

  2. Export and burn

    Open the 5×5 XCS in xTool Studio. Surface prep is on by default for supported stainless steel.

  3. Mark your plate

    Use Like, Best one, or Reject on the digital grid. No photo needed.

  4. Run a closer test

    Use the next suggested grid or name a confirmed square to add it to your color list.

Smart Test keeps your marks and confirmed colors in this browser. You can enter Nix readings alongside your picks. The next grid is based on your picks.

Run your first plate

Sign in to open Smart Test. Discovery, calibration, and the full set of controls are available in Advanced Lab.

Enter email and password first, then tap Create Account once. New here? After signup, check your email before signing in.

Create Account is disabled until email and password (6+ chars) are filled. Only click once — duplicate requests can delay email delivery.